Chief WMA2S Manual de instalación

INSTALLATION INSTRUCTIONSDual Stud Wall Mount AccessorySpanish Product DescriptionGerman Product Description Portuguese Product Description Italian Pr

WMA2S Installation Instructions10PROJECTOR INSTALLATIONWARNING: Exceeding the weight capacity can result inserious personal injury or damage to equipm

Installation Instructions WMA2S114. Remove cable management cover (if necessary) fromWMA2S arm. (See Figure 19)Figure 19NOTE: Cables may be routed fro

WMA2S Installation Instructions128. Route cables through cover mount, WMA2S arm and intocolumn. (See Figure 23)Figure 239. (Optional) Cables can be ti

Installation Instructions WMA2S132. Secure wall bracket top covers (C) to wall bracket arms byinstalling four #8-32 x 1/2" Phillips pan machine s

WMA2S Installation Instructions147. Install mount covers to the mount following instructions inInstalling Mount Covers section.Extension Adjustment1.

Installation Instructions WMA2S152. Install eight #8-32 x 1/2" button head security screws (M)into holes in wall bracket covers. (See Figure 34)F

WMA2S Installation Instructions168. Remove one of four bolts from adapter plate. (See Figure 38)9. Install one 1/4-20 x 3/4" button head security

Installation Instructions WMA2S17

WMA2S Installation Instructions18

Installation Instructions WMA2S19

WMA2S Installation Instructions2DISCLAIMERMilestone AV Technologies and its affiliated corporations andsubsidiaries (collectively "Milestone"

USA/International A 8401 Eagle Creek Parkway, Savage, MN 55378P 800.582.6480 / 952.894.6280F 877.894.6918 / 952.894.6918Europe A Fellenoord 130 5611 Z

Installation Instructions WMA2S3LEGENDTighten FastenerApretar elemento de fijaciónBefestigungsteil festziehenApertar fixadorSerrare il fissaggioBevest

WMA2S Installation Instructions4TOOLS REQUIRED FOR INSTALLATIONPARTS1/2" (12.7mm) steel stud#27/32" (5.6mm) wood 2" x 4" stud3/8&q

Installation Instructions WMA2S5Site RequirementsWARNING: IMPROPER INSTALLATION CAN LEAD TO EQUIPMENT FALLING CAUSING SERIOUS PERSONAL INJURYOR DAMAGE

WMA2S Installation Instructions6ASSEMBLY AND INSTALLATIONThe WMA2S dual stud wall mount accessory can be mountedto concrete, concrete block, 2" x

Installation Instructions WMA2S75. Install four 5/16 x 2-1/2" hex head lag screws (E) throughfour 5/16" washers (F), holes of mounting brack

WMA2S Installation Instructions810. Place wall bracket over anchors and align mounting holesin mounting bracket with holes in anchors. (See Figure 9)1

Installation Instructions WMA2S94. Loosen two bolts on either side of pitch adjustment screw.(See Figure 13)5. Adjust pitch adjustment screw until mou